 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Super Fast Recovery Diode RFU10TF6S Series Ultra Fast Recovery Dimentions(Unit : mm) Structure Applications General rectification (1) (3) Features 1)Single type.(TO-220) 2)Ultra High switching speed Construction Silicon epitaxial plnner (1) (3) Absolute maximum ratings(Tc=25C) Parameter Symbol VRM Repetitive peak reverse voltage VR Reverse voltage Average rectified forward current Io Forward current surge peak Junction temperature Storage temperature IFSM Tj Tstg Conditions Duty0.5 Direct voltage 60Hz half sin wave, Resistance load, Tc=50C 60Hz half sin wave, Non-repetitive one cycle peak value, Tj=25C Limits 600 600 10 100 150 -55 to +150 Unit V V A A C C Electrical characteristics(Tj=25C) Parameter Symbol VF Forward voltage IR Reverse current Reverse recovery time trr Thermal Resistance Rth(j-c) Conditions IF=10A VR=600V IF=0.5A,IR=1A,Irr=0.25xI R junction to case Min. - Typ. 2.3 0.03 16 - Max. 2.8 10 25 3.5 Unit V A ns C / W www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 1/3 2010.01 - Rev.A RFU10TF6S Electrical characteristics curves Data Sheet 100 100000 CAPACITANCE BETWEEN TERMINALS : Ct(pF) 1000 Tj=150C Tj=125C FORWARD CURRENT : IF(A) Tj=150C 10 Tj=25C Tj=75C 1 REVERSE CURRENT : IR(nA) 10000 Tj=125C f=1MHz Tj=25C 1000 Tj=75C 100 100 Tj=25C 10 0.1 0 1000 2000 3000 4000 5000 FORWARD VOLTAGE : V F(mV) VF-IF CHARACTERISTICS 1 0 100 200 300 400 500 600 10 0 5 10 15 20 25 30 REVERSE VOLTAGE : VR(V) VR-IR CHARACTERISTICS REVERSE VOLTAGE : VR(V) VR-Ct CHARACTERISTICS 2500 T=25C IF=10A n=20pcs 100 CAPACITANCE BETWEEN TERMINALS : Ct(pF) T=25C VR=600V n=20pcs 250 Ta=25C f=1MHz VR=0V n=10pcs FORWARD VOLTAGE : VF(mV) 2400 REVERSE CURRENT : IR(nA) 240 2300 AVE : 47.3nA 10 230 2200 AVE : 2249mV 2100 220 AVE : 221.3pF 210 2000 VF DISPERSION MAP 1 200 IR DISPERSION MAP Ct DISPERSION MAP 200 RESERVE RECOVERY TIME : trr(ns) ITS ABILITY OF PEAK SURGE FORWARD CURRENT: : IFSM(A) 30 T=25C IF=0.5A IR=1A Irr=0.25xIR n=10pcs 1000 150 AVE : 150.0A PEAK SURGE FORWARD CURRENT : IFSM(A) 25 20 100 100 15 AVE : 16.2ns 10 10 50 IFSM 8.3ms 1cyc IFSM 8.3ms 8.3ms 5 1cyc. 0 trr DISPERSION MAP 1 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 0 IFSM DISRESION MAP 1000 5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 AVE1.14kV C=100pF R=1.5k AVE4.11kV 10 Rth(j-c) IFSM time 100 TRANSIENT /W) THAERMAL IMPEDANCE : Rth ( PEAK SURGE FORWARD CURRENT : IFSM(A) ELECTROSTATIC DISCHARGE TEST ESD(KV) 1 10 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS 100 C=200pF R=0 0.1 0.001 0.01 0.1 1 10 100 1000 ESD DISPERSION MAP TIME : t(s) Rth-t CHARACTERISTICS www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 2/3 2010.01 - Rev.A RFU10TF6S 45 40 35 FORWARD POWER DISSIPATION : Pf(W) 30 25 20 15 10 5 0 0 3 6 9 12 15 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) Io-Pf CHARACTERISTICS 18 D=0.0 D=0. D=0 half sin D=0. AVERAGE RECTIFIED FORWARD CURRENT : Io(A) 12 10 8 6 4 2 0 0 D=0.2 D=0.1 D=0 0 D=0 D.C. 14 D=0.8 D=0.5 half sin 16 D.C. 0A 0V t Io VR D=t/T VR=480V Tj=150C Data Sheet T 30 60 90 120 CASE TEMPARATURE : Tc(C) Derating Curve"(Io-Tc) 150 www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 3/3 2010.01 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. R1010A |
Price & Availability of RFU10TF6S
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |